The GearUp is an RGB gear indicator that also contains eight shift lights.

The color and blinking status of each of the shift lights are individually configurable, based on the value of the engine's RPM and if the speed limiter is active. The color of the gear indicator is adjustable too and can optionally change and blink based on the RPM values.

Configuring the display

General settings

This section of the configuration screen allows you to adjust the brightness of the shift lights and gear indicator.

It is also possible to:

• Import/Export settings: you can have different configurations saved, that you use with different cars or different simulators. Use these buttons to load an existing configuration or save a new one.
• Test the display: Click this button to verify the display works correctly: the shift lights and gear indicator will be switched on in sequence.

Shift lights settings

In this section of the configuration screen you can:

• Click each led to manually configure it, setting its color and blinking state, based on RPM or speed limiter.
• In alternative to manually configure each led, you can use the configuration wizard to specify their colors, the RPM range and optionally how to display that the speed limiter is active.
• Speed limiter alternating pattern: you can have the shift lights to show that the speed limiter is active, either displaying a static color or having the color of the lights to alternate between two colors, at a configurable speed. This button allows you to change the colors and alternating speed of the patter.

Gear indicator settings

Use this section of the configuration screen for the gear indicator settings like primary and secondary color, blinking state.

Quick configuration wizard

The picture above shows the first section of the shift lights configuration wizard. There are basically three piece of information that must be entered:

• The color of the shift lights: by default it's red but it can be individually changed clicking on the single leds and selecting a different color.
• The range of RPM values displayed by the shift lights.
• Optionally, all the shift lights can change color and/or blink at a specific value of RPM.

The next step of the configuration wizard is about the speed limiter. The available options are:

• Not to display that the speed limiter is active
• Display a static color pattern: click each led and select the color to be displayed.
• Alternating pattern: the color of shift lights will alternate between two colors.
  

Individually configure shift lights

You can use the quick configuration wizard explained above to configure the shift lights. But you can also get to the same result manually configuring each shift lights, one at the time. Or you can use the quick configuration wizard first and then edit the shift lights configuratiuon to make small adjustments.

In the Shift Lights section, click one of the shift light icon. The dialog below will open. It will be empty if not previous configuration exists (generated by the quick configuration wizard, for example, or manually).

Click the New... button to start the configuration of the shift light. In the picture below the shift light is being configured to switch on RED when RPM are between 6.000 and 7.000

Multiple conditions can be added to the shift light configuration. Those with the hightest priority are at the top of the list.

In the example above, the shift light has been configured blinking blue when RPM are above 7.000

If RPM are below 7.000, the next condition in the list is evaluated and the shift light will be turned RED if RPM are between 6.000 and 7.000

Remember the conditions with hightest priority are those at the top of the list.